How to Assemble and Use the MBTC3 Air-Light Travel Cot
By My Babiie | Published: 2026-11-01
Category: How-to Guides
A step-by-step guide to setting up the My Babiie MBTC3 Air-Light 3-in-1 Travel Cot, using the bassinet mode safely, and packing it away without stress.
Quick answer
Set up the MBTC3 Air-Light by unfolding the aluminium frame until the rails lock, then lower the bassinet insert into the top position for a newborn. Always check every joint is secure before placing your baby inside.
Why the 3-in-1 design changes your setup routine
The MBTC3 Air-Light combines a travel cot, a co-sleeper, and a playpen in one frame. That versatility means you should decide which mode you need before you start unfolding, because the bassinet insert and the lower play level are used at different stages. Setting up in the wrong configuration and then swapping mid-trip wastes time and can leave you second-guessing whether the cot is secure.
The neutral ivory fabric and aluminium frame are designed for everyday use at home as well as nights away. Treat the first assembly at home as a practice run: it lets you learn the locking points and the bassinet fit without the pressure of a hotel room or a late arrival.
Bassinet mode versus playpen mode: choose before you build
Use the raised bassinet position for a newborn or young baby who is not yet sitting up or rolling. The lower cot or playpen level suits an older baby who needs a contained space to play or sleep. The MBTC3 does not list separate weight limits for each mode in the supplied information, so check the instructions that come with your cot before you decide which level to use for your baby's age and stage.
If you are travelling with a newborn and a toddler, you cannot use both modes at once in a single cot. Plan for one baby per cot, and consider whether the bassinet insert needs to be removed entirely when the cot is used as a playpen.
Where to set up the cot for safe use
Place the cot on a flat, stable floor away from radiators, windows, blind cords, and trailing cables. The Air-Light frame is lightweight, which makes it easy to move, but that also means it should never be used on a bed, sofa, or uneven surface. Keep the cot clear of other furniture so the mesh sides can ventilate freely.
When using the co-sleeper function, the cot must be positioned securely against the adult bed with no gap that a baby could slip into. Follow the supplied instructions for the co-sleeper attachment, and never leave the side lowered when the cot is used as a standalone sleep space.
Step-by-step: assemble and use the MBTC3 Air-Light
- Unfold the frame on a flat floor: Lay the folded cot on the floor and pull the aluminium frame upright until the top rails click into their locked position. Press down firmly on each rail joint to confirm it is engaged. Common mistake: leaving one rail partially locked, which makes the cot feel unstable. Run your hand along every top rail and listen for the click before moving on.
- Fit the bassinet insert for a newborn: Lower the bassinet insert into the cot so it sits level and its edges rest on the frame supports. Smooth the base flat and check there are no gaps at the sides. Common mistake: forcing the insert when the frame is not fully locked, which leaves the bassinet uneven. The bassinet should sit flat with no sagging; if it does not, recheck the frame locks.
- Set the lower level for play or older babies: Remove the bassinet insert and lower the base to the bottom position when your baby is ready for the playpen or lower cot level. Press the base down until it is fully flat. Common mistake: leaving the base half-clipped, which creates a soft spot your baby could roll into. Push down on the centre of the base to confirm it is taut and level.
- Check the cot is clear and ventilated: Keep the cot free of pillows, bumpers, and loose bedding. Use only a fitted sheet that matches the cot base. Common mistake: adding a thick mattress or extra padding that does not belong with the cot, which can create a gap at the sides. A firm, flat base with a snug sheet is the safest sleep surface.
- Pack it away in reverse order: Remove the bassinet insert first, then release each top rail lock and fold the frame down. Store the cot dry and fully folded. Common mistake: forcing the frame closed while a rail is still locked, which can bend the joints. If the frame resists folding, stop and check for a rail that is still engaged.
Product facts
- MBTC3 Air-Light 3-in-1 Travel Cot with Bassinet - Ivory: The MBTC3 Air-Light 3-in-1 Travel Cot in ivory combines a travel cot, co-sleeper, and playpen in one design with a strong aluminium frame. You get three uses from one purchase, but you must choose the right mode and check the frame locks each time you switch.
MBTC3 Air-Light 3-in-1 Travel Cot with Bassinet - Ivory
